Anafi AI cannot access to 192.168.53.1:180

ANAFI Ai
1

We have Anafi AI with Firmware Version 7.5. It can access to 192.168.53.1 but cannot access to the 192.168.53.1:180 for uploading flight plan. Thanks for your help.

2

Hi,

This is a known limitation of the system, to access the drone webserver via Olympe/SkyController you need to enable the direct connection developer setting in FreeFlight. This requirement should be lifted in future versions.

Regards,
Nicolas

3

Hi, Thanks for your help. The Anafi ai with firmware version 7.4, we can access to 192.168.53.1:180. But after upgrading the firmware to be 7.5, we cannot access to 192.168.53.1:180 even if enabling the direct connect by Freeflight 7.

Thanks,
Fred

4

The problem should be caused by the skycontroller 4 firmware version. The skycontroller 4 of Anafi ai with firmware version 7.4, we can access to 192.168.53.1:180. But after upgrading the firmware of skycontroller to be 7.5, we cannot access to 192.168.53.1:180 even if enabling the direct connection by Freeflight 7.

Thanks,
Fred

5

We try to update the skycontroller 4 to be 7.6 version. But we still cannot access to 192.168.53.1:180.

6

This topic was automatically closed after 30 days. New replies are no longer allowed.