Hallo,
I have a question Skycontroller UKR wants to be DHCP server after connection via ethernet cable and would like to assign IP address in sub-network 192.168.53.x/24.
I would like to assign to Skycontroller UKR fixed IP address in 172.16.x.x/16 subnetwork
Is it possible to configure computer between Samsung Galaxy Tab Active 5 tablet and ethernet port on the Skycontroller?
I need to turn off DHCP server and I would like to assign fixed IP address from our subnetwork.
Is possible to configure computer inside Skycontroller via SSH?
Thanks
Jindrich
This is unfortunately not supported on Skycontroller UKR.
The Skycontroller Ethernet interface is designed to act as a DHCP server with a fixed IP configuration, and it is not possible to disable DHCP or change the subnet. There is also no SSH access available to modify the internal network configuration.
Hi Hugo,
Thank you very much for your answer. Let me introduce the situation a little. We have a current private network with many sensors and vision systems. All these sensors work using the MPU5 radio data link from Persistent Systems.
Now we have the task of integrating a larger number of your drones into this network so that we can share video and telemetric information with other network users (all of them, one user can see more drone video in the same time).
We would like to connect the Skycontroller UKR to MPU5 via wire (RJ45 or RNDIS) to be able to share video with other members of the network.
Could you please advise on the best way to do that?
Thank you
Jindrich